EarthQuake VERSA Series Скачать руководство пользователя страница 6

10

11

Owner’s Manual

VERSA COMPACT TILLER AND CULTIVATOR 

Owner’s Manual

VERSA COMPACT TILLER AND CULTIVATOR 

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

UNPACKING AND ASSEMBLY

Carefully remove tiller assembly, additional assembly 

components and remaining packaging materials from 

package.

FIGURE 3

CARTON CONTENTS
TILLER ASSEMBLY
• 

Hardware Parts Bag:

• 

A - (2) M8 x 40 mm Hex Bolt

• 

B - (4) M8 x 40 mm Hex Flange Bolt

• 

C - (2) M10 x 45 mm Hex Bolt

• 

D - (4) M6 x 35mm Hex Flange Bolt

• 

F - (6) M8 x 25 mm Flat Washer

• 

G - (2) M10 Spring Lock Washer

• 

H - (6) M8 Nylock Nut

• 

I - (2) M10 Nylock Nut

• 

J - (4) M6 Nylock Nut

• 

K - (1) Lock Pin

• 

L - (2) Tine Shaft Sleeve

• 

Manual Parts Bag

• 

Left, Right, and Middle Handlebars

• 

Left and Right Side Shields

• 

Left and Right Tine Sets

• 

Pulley Box Cover

• 

E - (4) M5 x 25 mm Hex Flange Bolt

• 

Drag Stake

• 

Bottle of 4-cycle Engine Oil

FIGURE 2

4X

Open top of carton and remove packaging materials. 

Carefully cut the corners of the carton with a box cutter.  

Do not attempt to lift tiller assembly out of box.

FIGURE 4

 (FOR MODELS 20015/24734)

Remove hand knob bolts from both sides of tiller. Separate 

lower handlebar assembly from pulley box and cut zip ties 

to remove handlebars.

FIGURE 4

 (FOR MODELS 25780/29241)

Remove drag stake from tiller assembly by removing the 

lock pin and setting both aside.

DRAG

STAKE

LOCK

PIN

FIGURE 5

 (FOR MODELS 20015/24734)

Remove lock pin from one tine set.  Slide outer tine and  

rotate to align with the second hole position of inner tine, 

then secure with lock pin. Repeat for other tine set. 

a

c

d

a

b

d

c

b

FIGURE 5

 (FOR MODELS 25780/29241)

Remove lock pin from one inner tine.  Check that arrows 

on tines are pointed in the direction of forward rotation 

and slide outer tine so that it aligns with the second hole 

position of inner tine. Secure with the lock pin. Repeat for 

other outer tine.

RIGHT

OUTER

TINE

LOCK 

PINS

LEFT 

OUTER 

TINE

  WARNING

 COMBUSTIBLE DEBRIS CAN CATCH FIRE. IT IS A VIOLATION 

  OF CALIFORNIA PUBLIC RESOURCE CODE, SECTION 4442, 

  TO USE OR OPERATE ENGINE-POWERED PRODUCTS 

  ON ANY FOREST-COVERED, BRUSH-COVERED, OR GRASS- 

  COVERED LAND UNLESS THE EXHAUST SYSTEM IS 

  EQUIPPED WITH A SPARK ARRESTER, AS DEFINED IN 

  SECTION 4442, MAINTAINED IN EFFECTIVE WORKING 

  ORDER. OTHER STATES OR FEDERAL JURISDICTIONS MAY 

  HAVE SIMILAR LAWS. CONTACT THE ORIGINAL EQUIPMENT 

  MANUFACTURER, RETAILER, OR DEALER TO OBTAIN A 

  SPARK ARRESTER DESIGNED FOR USE WITH THIS PRODUCT.

NOTICE

  HANDLE ROTOTILLER WITH CARE. DO NOT DAMAGE 

  FORWARD CABLE WHEN TRANSPORTING OR OPERATING.  

  ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL. YOU 

  MUST ADD ENGINE OIL BEFORE STARTING ENGINE.  

Содержание VERSA Series














Отзывы: