background image

WARRANTY CONTINUED ON NEXT PAGE

2

3

Earthquake  Amplifiers  are  capable  of  generating  high  sound  pressure 
levels.  You  should  exercise  caution  when  operating  these  amplifier 
systems. Long term exposures to high levels of sound pressure will cause 

permanent  damage  to  your  hearing.    Sound  pressure  levels  exceeding  85dB  can  be 
dangerous with constant exposure. Set your audio system to a comfortable loudness 
level. Earthquake Sound Corporation does not assume liability   for damages resulting 
from the direct use of Earthquake amplifiers or other Earthquake products , and urges 
users to play their music at moderate listening levels.

 

CAUTION:

      3
      2
      1 -  1  1/ 2

          1
          1/ 2
          1/ 4    or   l es s

8
6
4

THE  CHART  (ON  THE  SIDE)  SHOWS  THE 
U . S .  G O V E R N M E N T S  O C C U PAT I O N A L 
SAFETY   AND   HEALTH   ADMINISTRATION   
(OSHA) REGULATIONS   WHICH   WERE   IN   
E F F E C T   A T   T H E   T I M E   O F   T H I S  
PUBLICATION  FOR  PERMISSIBLE    NOISE 
EXPOSURE, PER 29CFR1910.95,  TABLE G-
16.

D U R ATI O N I N H O U R S

THANK YOU

Thank you for choosing Earthquake Sound’s   high-end line of PowerHouse amplifiers for 
superior enhancement of your mobile audio system. With proper installation and responsible 
listening, your amplifier(s) will give you years of near perfect sound reproduction. 

We  strongly  recommend  you  to  have  your  new  amplifier(s)  installed  by  an  authorized 
Earthquake  Sound  dealer:  Installation  professionals  employed  by  your  dealer  have  the 
correct tools and knowledge to install your amplifier(s) neatly and successfully. Also, when 
your new products are installed by an authorized dealer, your product will include a FIVE 
YEAR  LIMITED  WARRANTY  (1-Year  for  Digital  models  excluding  PH2000W/D1).  If  you 
choose to perform your own installation,   your warranty will be subject to limitations. Dealer 
policies on handling warranty requests may vary from one dealer to the next. Please read the 
warranty information in its entirety and use good judgment when making these vital decisions.

Table Of Contents

Cautions and Advisories     Page • 2

Warranty                             Page • 3-4

PH800W.2                          Page • 6-7

PH1000W.2                        Page • 8-9

PH2200W.4                        Page • 10-11

PH2000W/D1                     Page • 12-13

PHD5000W                        Page • 14-15

PHD10000W                      Page • 16-18

Installation Example           Page • 19

Specifications                     Page • 5

  97

10 0
10 2
10 5
110
115

90
92
95

SO U N D LEVE L D B A

PH2000W/D1.1                   Page • 12-13

Specifications Are Subject To Change Without Notice

www.earthquakesound.com

Five (5) years limited warranty; PH800W/2, PH1000W/2, PH2200W/4 PH2000W/D and  
PH2000W/D1.1:

Earthquake warrants the original purchaser that all Factory Sealed New Audio Products 
be free from defects in material and workmanship, under normal and proper use, for a 
period of five (5) years from the date of purchase (as shown on the original bill of sale with 
serial number affixed/written on it). The five (5) year warranty period is valid only if an 
authorized Earthquake dealer properly installs the product, and the warranty registration 
card is properly filled out and sent to Earthquake Sound Corporation. If a non-authorized 
party installs the product a thirty (30) day warranty period will be applied.

(A) Five (5) years limited warranty plan coverage guidelines: 

-

First year: Earthquake pays for labor, parts, and ground freight (only in US 
mainland, not including Alaska and Hawaii) back to customer.

-

Second year: Earthquake pays for labor and parts only, customer must pay 
freight both ways. 

-

Third, fourth & fifth year: Earthquake pays labor only. Customer must pay for 
parts and freight both ways.

(B) Warning:

Products (sent for repair) that are tested by Earthquake technicians and deemed to have 
no problem(s) will not be covered by the five (5) year limited warranty. Customer will be 
charged a minimum of one (1) hour of labor (ongoing rates) plus shipping charges back to 
customer.

(C) Earthquake agrees to repair or replace - at our option - all such defective 
products/parts subject to the following provisions: 

-

Defective products/parts have not been altered or repaired by other than an 
Earthquake factory approved technician.

-

Products/parts are not subjected to negligence, misuse, improper use, or 
accident, damaged by improper line voltage, used with incompatible products, or 
have its serial number or any part of it altered, defaced or removed, or have been 
used in any way that is contrary to Earthquake's written instructions. 

(D) Warranty Limitations: 

Earthquake warranty does not cover products that have been modified or abused. 
Including but not limited to the following:
-

Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of 
improper use of cleaning materials/methods.

-

Bent speaker frame, broken speaker connectors, holes in speaker cone, 
surround & dust cap, burnt speaker voice coil.

-

Fading, deterioration of speaker components & finish due to improper exposure 
to elements.

-

Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or 
improper use of cleaning material.

-

Burnt tracers on PCB. 

-

Product/part damaged due to poor packaging or abusive shipping conditions.

-             Subsequent damage to other products.  

WARRANTY

Содержание PH2000W/D1












Отзывы: