Product Overview
Class "A/B" Amp
* 400 watts class "AB" , high efficiency
power amplifier.
* 24 dB / Octave variable filter from 40
Hz to 180 Hz.
* Automatic signal detection circuitry,
When "ON", it automatically turns on the
subwoofer when an audio signal is
detected. It also shuts the subwoofer off
after 30 minutes if no signal is detected.
* High level (speaker) audio inputs.
* Low level (RCA) audio inputs.
* Full range speaker outputs that can be
used to power up other full range
speakers in the system.
Front Panel:
* Volume control
* Operation status LED
a. Blue = Power "ON"
b. Red = Power "OFF" or Auto "OFF"
-5-
XLT Drivers
Every component of the XLT driver is
designed for accurate reproduction of
bass and sub-bass frequencies. With a
massive moving structure, the XLT
operates with extremely low distortion
and impressive transient response. Its
performance is attributed to a non-
conventional motor structure design,
that integrates components such as:
*
Thick, high-gauss magnets, with a
total height of 1.2 inches.
*
Over 7 inch (D), epoxy coated super
spider. Chill-plated for long lasting
linear performance.
*
2.5" diameter, high temperature voice
coil, with 1,85" copper winding
(height).
*
1.5" thick, single layer, thermally
pressed poly-ether foam surround.
The XLT structure allows for extreme
excursions (19 to 21mm) without
physical deformation or running out of
Reactive Electromagnetic Coupling.
Right
Left
LINE
OUT
LINE
IN
Right
-
Left
Right
Left
-
HIGH LEVEL OUTPUT
+
+
-
-
HIGH LEVEL INPUT
+
+
115/230V~60/50Hz
AC Select
POWER
ON
OFF
POWER
PHASE
ON
AUTO
OFF
180
0
115V~/60Hz
FUSE TYPE
T1.6AL/250V
230V~/50Hz
FUSE TYPE
T800mAL/250V
XOVER
FREQUENCY
40Hz
180Hz
80Hz
12
0
H
z
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
CAUTION
Made in China
Designed in the USA
Variable 24dB per
octave, low pass filter.
Range 40-180Hz
Recommended general
setting at 2 o'clock.
Low level
(RCA)
audio input,
in high pass
mode @
100Hz.
The 100Hz
high pass
output is the
perfect
source to
feed a center
channel amp.
Signal detection circuitry.
When "ON", it automatically
shuts off the amplifier in 30
minutes if music is not
detected.
0-180° Phase switch for
precision bass response
control.
Full range speaker
outputs. Connect to
power up other full range
speakers in the audio
system.
High level (speaker)
audio input. In an
existing system, you can
run the speaker wires
(L&R) into the amplifier
for audio input.
115 / 230
power
connector
with built-in
fuse for max
protection.
400-Watt High Performance
Powered Subwoofer
