EarthQuake 32228, Руководство пользователя

Страница: 10 / 32

ORDERING REPAIR PARTS
Parts can be obtained from the store where your log splitter
was purchased or direct from the factory. To order from the
factory, call or write to:
Ardisam, Inc.
1160 Eighth Avenue, Cumberland, WI 54829
Phone 800-345-6007 Main Fax (715) 822-2223
E-mail: info@getearthquake.com
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
Minimum Order..............................................$10
SERVICE INFORMATION
IMPORTANT
IN CASE OF A SERVICE PROBLEM, DO NOT SEND
UNIT BACK TO RETAILER. CONTACT ARDISAM, INC.,
AT 1-800-345-6007, ANY TIME MONDAY THROUGH
FRIDAY FROM 8 A.M. TO 5 P.M. WE WELCOME YOUR
CALL.
In the event you experience trouble operating your log splitter,
follow the suggestions in the troubleshooting guide in this section.
The guide will help you pinpoint the causes of common problems
and identify remedies.
For more complicated repairs you may want to rely on your retailer,
an authorized mechanic, or Ardisam, Inc. (Contact your retailer
for a list of authorized mechanics in your area). A parts catalog is
included in this section.
We will always be glad to answer any questions you have, or
help you find suitable assistance. To order parts or inquire about
warranty, call or write us at the address found in the next column,
under the section ordering repair parts.
SERVICE, TROUBLESHOOTING AND REPAIR
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REMEDY/ACTION
Fails to split logs 1. Log is improperly positioned 1. Refer to Log Splitter Operation Section for log
loading
2. The size or hardness of the log exceeds
the capacity of the machine
2. Reduce the log size before splitting on the log
splitter
3. Wedge cutting edge is blunt 3. Refer to Sharpening Wedge Section to
sharpen the cutting edge
4. Oil leaks 4. Locate leak(s) and contact Customer Service
5. Unauthorized adjustment was made to
the maximum pressure limiting screw
5. Contact Customer Service
The log pusher moves with
a jerking motion, makes an
unfamiliar noise or vibrates
excessively
1. Lack of hydraulic oil and excessive air
in the hydraulic system
1. Check oil level for possible oil refilling. Contact
Customer Service.
Oil leak occurs around cylinder
ram or from other points
1. Air sealed in hydraulic system while
operating
1. Loosen bleed screw 3-4 rotations before
operating the log splitter
2. Bleed screw is not tightened before
moving the log splitter
2. Tighten the bleed screw before moving the
log splitter
3. Oil drain bolt with dipstick is not tight 3. Tighten the oil drain bolt with dipstick
4. Hydraulic control valve assembly and/
or seal(s) worn
4. Contact Customer Service
Contact Customer Service at 800-435-6007 M-F 8-5.
10
Owner’s Manual
5-TON ELECTRIC LOG SPLITTER
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST