EarthPulse v.5 Pro, Быстрый старт

Страница: 6 / 7

5
D) Initial 1-3 Hour Session: (please do baseline RBH test )
Please do this session as far from nighttime sleep as possible.
1) Remove Cross-Polarizing ring from magnet(s); refer to magnet
schematic ;
3ODFH6OHHS&RQ¿JXUHGHOHFWURPDJQHWZLWKHPERVVHG³1´¶VIDF -
ing up on top of mattress under a soft yet thin pillow. Position your
head to have the magnet directly below base of skull;
3) Boot controller -> RECOVER MODE; SELECT button to choose
program; UP/DOWN arrow to set timer at 1 - 3 hours; SELECT/
START button begins program. Blue diode is blinking;
Initial session v.5Pro
3ODFHVHFRQG6OHHS&RQ¿JXUHGHOHFWURPDJQHWRQWRSRIPDW -
tress under base of spine (pad with folded towel if necessary
for comfort); make sure CROSS-POLARIZING ring is -OFF-
4) UP/DOWN arrows adjust amplitude; once program running w/
head on pillow, adjust amplitude up / down for comfort;
.
5) Get comfortable with magnet position(s); Close your eyes and
HQMR\\RXU¿UVWVHVVLRQ
6) This session determines if RECOVER-MODE will provide sleep or
not. If NOT, you begin nighttime use with SLEEPEASY or SLEEP-3;
7) If you have neurological disease you should do some basic be-
fore/after tests like handwriting sample, let family member watch/
video tape your walking, getting in/out of your favorite chair, walking
EDFNZDUGVWXUQLQJDURXQGPDNLQJIDPLOLDOFLUFOHVZLWK¿QJHUV<RX
will want to repeat this initial session with more and more amplitude
(adding core and base) every day until you plateau your performance
enhancement;
7a) Wait 20 minutes after completion of initial session to re-
WHVWPRELOLW\ ¿QJHUGH[WHULW\