Earthlite Ellora Vista Salon, Руководство пользователя

Страница: 7 / 20

5
A
B
C
D
The following steps will guide you through carefully removing your Ellora™ Vista Stationary table from
the shipping crate. We recommend wearing work gloves during these steps.
Remove the rectangular cardboard lid from the top of the table. Once you have removed the cardboard
lid and surrounding cardboard walls from shipping crate, you will find the wheels and foot glide
levelers are seated tightly within wood brackets which have been screwed into the plywood base of
the shipping crate.
UNPACKING YOUR ELLORA VISTA™ STATIONARY TABLE
RECOMMENDED TOOLS NEEDED
TABLE REMOVAL FROM SHIPPING CRATE
Phillips #1 Screw
Driver
Step 1
With a Phillips #1 screwdriver (or a powered screwdriver),
carefully unscrew and remove the two (2) Front facing
wood brackets from the plywood base.
(Diagram A)
We recommend removing the two (2) front facing wood
brackets (Diagram A) that enclose the foot glide levelers.
Do not remove the rear brackets which enclose the rear
wheels (Diagram B). These brackets are twice as thick as
the front brackets, and will be more difficult to remove.
Step 2
Once the front brackets are removed, Carefully pull the
Ellora™ Vista straight away from the rear brackets and
slide the table onto the floor. We recommend at least two
(2) people conduct this step together.
(Diagram C)
It is possible to lift the table directly out of the shipping
crate without removing any of the wood brackets, but this
is dangerous and not recommended because the weight of
the table is at least 200 lbs.
Step 3
Once the table is pulled safely away from the shipping
crate, make sure the path from the table to your preferred
destination is clear of any obstacles or tripping hazards.
(Diagram D)
Work
Gloves
If you did not have your table shipped with ‘white glove’ service, you may be
required to remove your table from its shipping crate. We highly recommend that
at least two people conduct the following steps to uncrate the table.