ISFOLAMES LINEAR BURNER
2/2021
16
Burner Lighting Instructions
INSTALLER INSTRUCTIONS
It is required that the set of safety instruction labels that have been supplied with the appliance be affixed to the
operation and control points of the appliance. It is the installers responsibility to ensure these warnings are properly
affixed during installation. These warning labels are a critical step in informing consumers of safe operation of this
appliance
.
PRE-LIGHTING CHECKLIST
Be sure to check these items before the initial lighting of the appliance:
•
Gas pressure has been checked carefully
•
All gas fittings have been checked for leaks.
•
All clearances to combustibles have been met
•
All combustibles materials have been removed from the area in front of the appliance.
•
All vented areas of the appliance face are unobstructed.
•
House is ventilated to clear initial paint curing odors
•
All packaging materials have been removed from the appliance.
•
While appliance is cool, fingerprints or other marks have been cleaned from any plated surfaces with denatured
alcohol and a soft cloth. Marks left on these surfaces may become permanent into the finish if not removed prior
burning the unit.
WARNING!!!:
IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY
RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
SAFETY INSTRUCTIONS
A.
This appliance is equipped with an ignition device which automatically lights the pilot. Do NOT try to light the pilot by
hand.
B.
BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some
gas is heavier than air and will settle on the floor.
WHAT TO DO IFYOU SMELL GAS
:
•
Do not try to light any appliance.
•
Do not touch any electric switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
•
If you cannot reach your gas supplier, call the fire department.
C.
If any portion of this appliance does not operate as the instructions indicate, do not try to repair it, call a qualified
service technician. Do not use tools. Force or attempted repair may result in a fire or explosion.
D.
Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to
inspect the appliance and to replace any part of the system and any gas control which has been under water.
OPERATING INSTRUCTIONS
Terminal X4 on module serves as Main Power switch. When X4 is jumpered, the Battery Holder Wall Switch functions
as a burner and pilot override switch. When in the
OFF
position, it will not let the burner or pilot be turned on by the
remote. When in the
ON
position the pilot and burner will initialize immediately. When in the
REMOTE
position, it
gives the remote full control over burner and pilot functions.
NOTE:
See Remote Control System on pages 15-16 for remote specific operating instructions.
TO TURN OFF GAS TO APPLIANCE
1)
Turn the burner ON/OFF switch to “OFF.”
2)
Turn off all electric power to the appliance if service is to be performed.
3)
Close the main line gas shut-off valve.
WARNING!!!: OPERATION OF THIS APPLIANCE WHEN NOT CONNECTED TO A PROPERLY INSTALLED AND
MAINTAINED VENTING SYSTEM CAN RESULT IN CARBON MONOXIDE (CO) POISONING AND POSSIBLE
DEATH.
Содержание ISOKERN ISOFLAME ISF24LB
Страница 22: ...ISFOLAMES LINEAR BURNER 2 2021 22...