4 - Place assembled frame structure into the bottom panel of the tent as shown, then drape the canvas over
the structure from the back.
5 - Close the zippers from both sides to align the canvas to the frame.
6 - Open the zippers fully to install supports into the top portion of the inside of the tent.
G Straight support is to be installed from front to back, H supports span the width of the top.
Instructions - continued
Back
Front
Front
7 - Insert liner tray into the bottom of the tent fastening the ties around the connector poles.
8 - Assembly is now complete. Close zipper, make any small adjustments needed to ensure the best fit on the
frame and your grow tent is ready to use!
Copyright 2011 DTX International
www.earthworth.com
Back
G
G
H
H
H
H