HDCam
Installation Manual
EN.PM.UM11 2017022424 Earth Networks Part # 9710 Page 28 of
35
Earth Networks HDCam Viewer Page Configuration
In this section you will have the ability to set a static IP address for you camera.
In order to configure your camera you MUST have the internal IP address of your
HDCam. If you do not know the internal IP address of your HDCam, please refer to the
Live Video section of Viewing Live Video and Captured Images on page 16. Follow the
steps to open the Earth Networks HDCam Viewer Page. If you know your IP address,
you can refer to Step 10 in the Live Video section of “Viewing Live Video and Captured
Images” for explanation of how to open your live video inside of a web browser window,
also known as the Earth Networks HDCam Viewer Page.
Once you have the window open click on the word “Config” on the bottom left of the
webpage.
Figure 19 – Earth Networks HDCam Viewer Page Showing Location of Config Link
A window will pop-up prompting you to enter a user name and Password. Your camera
has been programmed with a generic user name and password. Your user name is
admin
and your password is
WxBugHD
. The password is case sensitive.
