earomix ABT-S100, Руководство пользователя, Страница: 6 / 13

Bluetooth Stereo Headset earomix ABT-S100
User Guide
09 08
•
Powering
When the headset is switched on, the headset is put in the connectable state that other
device can be either paired or connected. In order to use with a mobile phone or other
device, please pair or connect the headset to the mobile phone or the device.
1) Power On
Press and hold down both and
+ +
at the same time
for 3 seconds.
Red indicator light flashes three times and a high pitch
beep is heard two times.
2) Power Off
Press and hold down both and
+ +
at the same time
for 3 seconds.
Blue indicator light flashes two times with single high
pitch beep.
•
Pairing
Pair earomix ABT-S100 headset with mobile phone or other Bluetooth enabled device
before using it. Paring is a process establishing a new relationship between two
Bluetooth enabled devices.
[Notes]
The headset must be fully charged before using it for the first time.
❶ Put the headset in pairable state.
Switch the headset on.
When the headset is switched on, it flashes Red every
2 seconds.
Press and hold down
▶/■ until Red and Blue indicator
lights flash in turn. (Approx. 3 seconds)
[Notes]
•
If the headset is not paired within 3 minutes after going into the pairable state, it returns to
the connectable state. In this case, the indicator light flashes Red every 2 seconds. Press and
hold down
▶/■ for 3 seconds to make it in the pairable state again.
• Please put the headset and the device you wish to pair with closely.