Earmor M32 PLUS, Руководство пользователя

Страница: 5 / 7

Step 3: Rotate the adapter to the angle shown in Figure 1.
Step 4: Slide out the steel wire from slider
Step 5: Pinch the rubber end and pull it outwards, and then detach the microphone arm from slider.
B: Microphone Arm
A
:
Rubber End C: Slider
1
Part1
Part2
Button Operations:
Volume Up (+) Button Power/On-Off Button Volume Down (-) Button
Operation List:
Action Button Headset Status Sound Prompt
Power On
Press and hold the Power
Button for 2 seconds
Off State “Power On”
Power Off
Press and hold the Power
Button for 2 seconds
On State “Power Off”
Volume Adjustment Click /- Button On State
Five volume levels available.If at the maximum/minimum
level, sound prompts “DeDe” (max volume)/ “DuDu” (min
volume)
Auto-off after 4 hours
Auto power-off after 4 hours
without any operations
Standby State
Low Battery Alert
Battery voltage at 2.55V
signals a low battery alert
On State “Battery Low”
Low Battery Shutdown
Battery voltage below 2.45V
triggers auto shutdown
On State “Power Off”
Step6 : Put the rubber end back onto the top of the sldier, and then insert the steel wire.
Step 7: Align the Slider Opening with the groove on the earcups, and press it forcely to clicks into place.
90°
1 2