19. SPARE PARTS AND ACCESSORIES
20. WARNING
Ear Cushions&Foam Liners: S26A or S26B
Detachable Microphone: S10D
1) To reduce the risks associated with harmful noise or chemicals: If
instructions are not followed, bodily injury may result or protection may be
severely affected;
2) When interference increases or the sound level becomes too weak, it is time
to change the batteries;
3) Remove the batteries before you store the headset for long periods of time. A
leaking battery may cause bodily injury or damage to the hearing protector;
4) These hearing protectors help reduce exposure to hazardous noise and
other loud sounds. Misuse or failure to wear hearing protectors at all times
when you are exposed to noise may result in hearing loss or injury;
5) If there is any drainage from your ear or if you have an ear infection, consult
with your physician before wearing hearing protection. Failure to do so may
result in hearing loss or Injury;
6) The product may be adversely affected by certain chemical substances.
Refer to the manufacturer for further information.”;
7) Earmuffs, and in particular cushions, may deteriorate with use and should be
examined at frequent intervals for cracking and leakage.
8) Fitting of hygiene covers to the cushions may affect the acoustic
performance of the earmuffs;
9) The earmuff is provided with level-dependent attenuation, safety-related
audio input. please check correct operation before use. If distortion or failure
is detected, please refer to the manufacturer’s advice for maintenance
10) Please note that the performance may deteriorate with battery usage and
the typical period of continuous use that can be expected from the earmuff
batteries, when fully charged.
Please ref. BATTERY CHECKING AND CHARGING INSTRUCTION.
11) the output of the audio circuit of this hearing protector may exceed the
exposure limit level.
12) The product shall not be used if it can't be ensured that the input voltage
doesn't exceed the maximum value stated in APPROVALS EN352-8:2020
table 1
For proper use, see user instructions or contact EARMOR Technical Service via
Email: