Earlex SprayPort HV6002, Руководство по эксплуатации

Страница: 9 / 12

9
GROUNDING INSTRUCTIONS
WARNING! THIS APPLIANCE MUST BE GROUNDED
If you are using an extension lead it must be rated a minimum of 13 Amps and fully unwound. Do not
operate with a lead rated less than 13 Amps as this will cause premature failure of the product which is
not covered by the warranty.
In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a cord having a grounding wire with
an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and
grounded in accordance with all local codes and ordinances. If the cordset is damaged, it must be
replaced using a genuine Earlex part to avoid a hazard.
Check with a qualified electrician or serviceman when the grounding instructions are not completely
understood, or when in doubt as to whether the product is properly grounded. Do not modify the plug
provided; if it does not fit the outlet, have the proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug similar to the plug illustrated
below. Only connect the product to an outlet having the same configuration as the plug. Do not use an
adapter with this product.
Extension Cords
Use only a 3-wire extension cord SJT that has a 3-blade grounding plug, and a 3-slot receptacle that
accepts the plug on the product. Make sure your extension cord is not damaged. When using an
extension cord, be sure to use one heavy enough to carry the current your product draws.
For lengths less than 25 ft, 16 AWG extension cords shall be used. For lengths greater than, 25ft up to a
maximum length of 50ft, 14 AWG shall be used. An undersized cord results in a drop in line voltage and
loss of power and overheating.