12
© Earlex Ltd 2004
SG424 03/04
MAINS CONNECTION (WARNING-THIS APPLIANCE MUST BE EARTHED)
If the mains lead is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
Your unit may have been supplied with a mains lead that has the plug moulded to it. This type of plug
will have a fuse holder in its base. Please read the following safety instructions before use.
1. If the moulded plug is cut off from the mains lead then the plug must be disposed of safely. It must
NEVER
under any circumstances be plugged into a live power socket.
2.
NEVER
under any circumstances use the appliance without the fuse cover of the 13 amp plug fitted.
This is the little cover fixed into the base of the plug to hold the fuse in place.
3. If you lose the fuse cover then please contact any electrical dealer for a
replacement or ring our helpline.
4. A replacement fuse must be rated at 5amp. The fuse must be manufactured and approved to
BS1362
5.
IF IN ANY DOUBT PLEASE CONSULT AN ELECTRICIAN.
WARNING-
If you are using an extension lead, it must be rated at a minimum of 6 amps and fully
unwound. Do not operate with a lead rated at less than 6 amps as this will cause premature failure of
the motor and will void your guarantee.
SAFETY WARNING LABEL
One of the labels on the spray gun is a warning label and shows three diagrams. If you are in any doubt
about their meaning, please see the explanation below.
<21˚C
10
20
30
40
50
60
70
80
90
<21˚C
10
20
30
40
50
60
70
80
90
<21˚C
10
20
30
40
50
60
70
80
90
Do not direct the spray gun
at yourself or anyone else.
(Risk of injection)
Do not use your spray gun in
wet weather.
Do not use your spray gun for
spraying flammable materials. i.e
those with a flashpoint less than
21˚C.
Earlex Ltd., Moorfield Road, Slyfield Industrial Estate, Guildford, Surrey, GU1 1RU.
Tel: 01483-454666 Fax: 01483-454548 email: [email protected] website: www.earlex.co.uk
EC Declaration of Conformity
We declare that the units ASG100 & ASG120 conform to: 73/23/EEC, EN50144-1,
EN50144-2-7 89/336/EEC, EN61000-3-2 & EN61000-3-3, EN55014-1, EN55014-2
Tim Hopper-Technical Director
GUARANTEE
This product is guaranteed for a period of 24 months against faulty manufacture or materials. It is not
guaranteed for hire purposes. This guarantee does not affect your statutory rights. In the event of any
problem occurring please contact us on our helpline no:
01483-454666
Monday - Friday 08:30 - 18:00 (Except Bank Holidays)
EU Registered Design No 28071
Australian Registered Design No 152436
UK Registered Design No 3009595
Design registration applied for in USA
Copyright & Design Right Reserved ©
Содержание AGS120
Страница 10: ...10...
