Ear Technology EarTech TV Audio Скачать руководство пользователя страница 3

OFF

ON

R

VOLUME

1

green LED

OFF / ON

SWITCH

OFF / ON

SWITCH

green LED

VOLUME

1

How to use:

EarTech TV Audio with under-the-chin Headset Receiver

1.  Turn on your sound source (e.g. TV).
2.  While wearing the headset, adjust the volume level initially to a low volume to protect 

your hearing. The volume increases when you turn the dial toward “10” and it decreases 
when you turn the dial in the direction of “0”.

3.  Turn the headset on with the switch on the side. The flashing green LED indicates that 

the receiver is switched on. The LED will be solid green once a signal is received from 
the sound source. If the green LED continues to flash after one minute, refer to pg. 
11 for pairing instructions.

4.  Set the desired volume on your headset.
5.  We recommend that you turn off the headset and place back into the transmitter cradle 

when not in use, to ensure that the battery is always charged.

How to use:

 

EarTech TV Audio Neckloop Receiver

CAUTION:  If you have a heart pacemaker, contact your physician or the manufacturer of 

the pacemaker before using the neckloop, to ensure that the pacemaker is not 
subject to interference.

1.  Turn on your sound source (e.g. TV), and switch your hearing aids to T-coil setting.
2.  Adjust the volume level on the neckloop initially to a low volume to protect your 

hearing. 

3.  The neckloop lock is used to safely wear the device and is designed to release to 

minimize accidents. Ensure that the neckloop lock has been closed completely 
(see pg. 5) 

4.  Turn on the neckloop receiver by using the ON/OFF switch on the side of the receiver. 

The flashing green LED on the receiver indicates that the receiver is switched on. The 
LED will be solid green once a signal is received from the sound source. If the green 
LED continues to flash after one minute, refer to pg. 11 for pairing instructions.

5.  Set the desired volume on your neckloop receiver.
6.  We recommend that you turn off the neckloop and place back into the transmitter 

cradle when not in use, to ensure that the battery is always charged.

EarTech TV Audio

User Manual

 5

Содержание EarTech TV Audio










Отзывы: