CREATED ON: May 24, 2018
OPERATING
CONDITION
/MODE
TIMING
SEQUENCE
STATUS
RELAY
LED
CH1
ON TIME
RLY1 ON
ON
OFF TIME
RLY1 OFF
OFF
CH2
ON TIME
RLY2 ON
ON
OFF TIME
RLY2 OFF
OFF
CH3
ON TIME
RLY3 ON
ON
OFF TIME
RLY3 OFF
OFF
CH4
ON TIME
RLY4 ON
ON
OFF TIME
RLY4 OFF
OFF
a) The Set time changed when timing in progress is effective for the next
cycle onwards (after the completion of the off time of ch4).
b) The Set time changed when S1-S2 is open is effective for the immediate
timing irrespective of hold/restart (i.e. Power is not interrupted).
c) The Range settings shall not be done in the forbidden area.
Technical Specification
Function
Sequential timer with 4 channels.
Rated supply Voltage
240V AC
Operating voltage
range
± 10% of the rated voltage
Rated Frequency
50Hz ± 5%
Power consumption
AC Approx. 20VA / 4W.
Control output
4 O/P'S (5A @ 250 VAC/28 VDC resistive)
Start Signal (S1, S2)
Potential free closure (CONTINUOUS).
On time range
0.1 to 1 S/M/H for each channel
Off time range
0.1 to 1 S/M/H for each channel
Setting accuracy
± 10 % max. w.r.t full scale ± 100 mSec
Repeat accuracy
± 1 % max. ± 100 mSec
Recovery Time
1Sec minimum
Variation due to
voltage change
± 2% max. ± 100 mSec
Variation due to
temperature change
± 5% max. ± 100 mSec
Variation due to
frequency change
± 2% max. ± 100 mSec
Ambient temperature
Operating : -10
˚
C to +55
˚
C
Storage
: -25
˚
C to +80
˚
C
Humidity
MAX 85% RH @ 40
˚
C
Disposition
Once the product life is over, you may send Back the unit to
EAPL for disposition.
Contact
Electronic Automation Pvt. Ltd
#20, KHB Industrial area
Yelahanka
Bangalore -64
Ph:+91-80-28567561/2,/42802345
Customer care :Ph:+91-80-42802323
Email :
www.eaplindia.com
OD RK AN 050011
REV 02/24-05-2018
Page 2 of 2
