Faucet
Pipe
Connecting
Diagram
Waterfall inlet
0 9
AC220V/50Hz
AC220V/50Hz
AC110/60HZ-240V/50Hz
AM2 1 9
AM221
1200W
1500W
15W
1501 Hand shower
Selector switch
Hot water switch
Cold water switch
Cold water
Hot water
Installation step
The product use standard accessories. Please refer to production tech parameter and follow the below steps for installation:
1. Confirm the direction for the product.
→
2.Adjust the product for horizontal.
→
3. Connect the water-in and water drain.
→
4.Connect the power.
→
5.Check and confirm.
→
6.Repositon.
→
7.Pour water and test.
1. Confirm the direction for the product
Please see to the product technique diagram and related tech parameter to connect the water drain pipe, power socket, water inlet pipe. Confirm if
there is enough space for the connection.
2.Adjust the product for horizontal
Adjust the adjustable leg of the product, turn it into horizontal level.
3. Connect the water-in and water drain
Standard figuration
Installation step
The water outlet pipe lays in the bottom of the bathtub, with diameter 38mm, the pipe could be elbow in whatever way you like. Please put the pipe into
water drain system and seal it well. Please keep the pipe running through to avoid water exhausted.
4. The power connection
This item is adjustable by the required power; Please refer to the technique parameter for the direction of the power socket. Pay attention to the water-
proof; connect the connector plugs into the socket. (Noted: the yellow-green bi-color wire from the water pump is the ground line, the diameter is 8mm.)
5. Check and confirm
After the above steps, please check the connection points are sealed or not. Clean the dirty things in the bathtub and open the water drain. Wash the
bathtub by water. In order not to stuff the water drain and jets, please do clean the dirty things before washing.
6. Reposition
Reposition the product to where you want.
7. Pour the water in, check and test before use
Confirm the bathtub is clean. Close the water drain and start storing water. When then water level is higher than the probe, turn on the bathtub and
test the functions according to the control panel instruction.
Electric parameter
Model
No.
Parameter
Spare part
Rate voltage
Rate power
Rate voltage
Rate power
Water pump
Ozone
Bottom
light
Heater
Speaker
Installation Instruction 10
