eagletone.com
User’s manual english
EAGLETONE TWIN FLOWER LED
OPERATION
• Plug the power cord in. Make sure the power line is
correctly earthed. Turn the switch to the “ON” position,
and allow the machine to heat up. The red LED on the line
control will light up once the machine has finished heating
up and is ready.
• Press the red key for the machine to spray fog (press it for
as long as you need it to spray fog).
• The red LED on the remote control indicates that the
machine is ready to spray fog. If it is not lit, then the
machine is in the process of heating up, and therefore is not
ready yet.
• The machine can be rigged overhead (using appropriate
and safe rigging equipment) or positioned on the ground.
Do not spray fog directly at people and do not tilt the
machine at an angle exceeding 15°.
• Check frequently that there is enough fog liquid in the
machine. Operating the fog machine when it is out of fog
liquid can cause severe damage.
• If the fog produced is scarce or if there is not any at all or if
the machine makes an unwanted noise, please switch it off
and check the level of fog liquid, the fuse, the connection
with the remote control and the power socket. If the
problem persists after these checks are performed, please
return the fog machine to the distributor for servicing.
SERVICING
• Please clean the fog machine to avoid damage to the
various parts and reduce the repair charge.
• Keep the fog machine clean at all times. Screw the liquid
can cover back once you have finished adding fog liquid.
• After about 40 hours of use, please use a mixture of 80%
distilled water and 20% white vinegar to clean the dirt
accumulated in the refractory pipe.
• In order to maintain good spraying conditions, take the
spray mouth (the end that goes into the liquid container)
apart while cool and clean it with white vinegar.
• Put the spray mouth back on the machine’s pipe once it has
cooled down and add fog liquid for next use.
MISCELLANEOUS
Clean regularly after each use to extend the lifespan of the
machine. Use dry cloths to clean the machine and store in a
dry place.
SPECIFICATIONS
• Voltage: 220 V/50 Hz (110 V/60 Hz)
• Power: 700 W
• Warming Time: 5/7 min
• Output: 70m3/min
• Tank capacity : 1L
• Size: 420×240×220
