eagletone.com
Eagletone Amplifier AERO15
User’s manual
5
Hold the
[CHANNEL]
button down for 2 seconds.
When the green LED starts to flash, you are in
tuning mode.
Use the Type switch to select the name of
the string you want to tune, than play the
corresponding open string once.
Note: No sound is played through the unit’s
speaker while the tuner function is in use.
Tune the string until the blue indicator lights up.
1. As long as the note is too low or flat, only the
green LED flashes.
2. When the note gets closer to the exact pitch
but is still a bit too flat, the blue LED lights up
while the green LED keeps flashing.
3. When the note has reached the exact pitch,
only the blue LED lights up.
4. When the note is set to a slightly higher pitch,
the blue LED lights up while the red LED
flashes.
5. When the note is too sharp or high, only the
red LED flashes.
Note: Determine the volume level by
adjusting the volume control of the connected
device.
CD/MP3 JACK:
You can connect a CD player, MP3 player or
any other kind of device to this 3.5mm jack
and have it play along while you play the
guitar.
NOTE: Determine the volume level by
adjusting the volume control of the connected
device.
MIXER/PHONES JACK:
Use mono 1/4" phone plugs when connecting
to this jack. Connect headphones to this
jack.
NOTE: No sound is played through the unit’s
speaker while the Mixer/Phones jack is in
use.
MAINS IN
Connect the included mains cord to this
socket. Ensure the amp’s voltage rating
matches your local AC power rating before
you plug the cord into the wall outlet.
TUNING
(reference Pitch A4=440Hz)
Manual AERO15 English A5.indd 5
20/06/13 15:13
