ASSEMBLY GUIDE
ASSEMBLY GUIDE
3
025G
025C
025B
025K
025D
025J
025G
025G
4
Clip the hinge pins of the two
persicope inner covers (025G)
firmly into the hinge bases on
the driver’s hatch inner face (025F).
6
Clip the hinge pins of the left
periscope cover (025C) into
the hinge base on the driver’s
hatch (025A) so that it covers the
left periscope. Repeat for the right
periscope cover (025D). Then clip the
driver’s hatch hinge (025B) over the
other side of the hinge base.
7
Fit the driver’s hatch assembly
over the central aperture in the
front of the upper hull (012A)
and engage the two screw posts in
the underside of the hinge (025B)
with the holes above the aperture.
Turn the upper hull upside-down
and place the two spacers (washers)
(025K) over the protruding screw
posts, then fix with two HP screws.
8
This is how the
driver’s hatch looks
when it is fitted.
NOTE: With the lock
handles (025H and 025I)
unfastened on the inside,
the hatch can be lifted up
and down.
5
Push the driver’s hatch closing
handle (025J) into the two
holes in the driver’s hatch
inner face (025F) in the position
shown.
HP
HP
025F
025F
025A
012A
025G
025J
025B
025C
025K
025D
025E
025H
025F
025E
025A
025G
1
Fit the driver’s hatch left hook
handle (025H) and right hook
handle (025I) to the driver’s
hatch inner face (025F) in the
positions shown. Fix each handle
from behind with an HP screw.
3
Fit the driver’s hatch inner face
(025F) over the driver’s hatch
(025A), ensuring that the screw
posts engage with each other inside
and that the persicopes protrude
through the two rectangular apertures.
Fix with two BP screws.
2
Push the driver’s periscopes
(025E) into the two rectangular
apertures in the driver’s hatch
(025A). Ensure that the two ridges
between the periscopes fit over the
single off-set ridge between the two
holes – the persicopes will therefore
only fit correctly one way round.
BP
HP
HP
BP
HP
BP
CODE
NUMBER
COMPONENT NAME
QUANTITY
025A
Driver’s hatch
1
025B
Driver’s hatch hinge
1
025C
Left periscope cover
1
025D
Right periscope cover
1
025E
Driver’s periscopes
1
025F
Driver’s hatch inner face
1
025G
Persicope inner cover
2
* includes spares
025B
025A
025F
025F
025A
025H
025J
025I
025I
025E
025A
CODE
NUMBER
COMPONENT NAME
QUANTITY
025H
Driver’s hatch left lock handle
1
025I
Driver’s hatch right lock handle
1
025J
Driver’s hatch closing handle
1
025K
Spacer (washer)
2
BP
1.7 × 4mm screw
2+1*
HP
1.7 × 3 × 5mm screw
4+1*
2
