EagleBurgmann eMG Series, Руководство по эксплуатации

Страница: 11 / 26

Operating Manual / en
eMG
page 11 / 26
Rev. 2 05/02/2020
Operating limits
ATTENTION! Operating limits depending on the materials used.
Type: eMG and versions
Shaft diameter (dw) : 15 ... 110 mm
Temperature to be sealed (t1) : -20 ... +120 °C
Sliding speed (vg) : 10 m/s
Material combination : eSiC-Q7 / eSiC-Q7
A / eSiC-Q7
B / eSiC-Q7
Pressure to be sealed (p1) : 18 bar g
Material combination : Q1 / Q1
Pressure to be sealed (p1) : 10 bar g
Please observe that the given operating limits interact, and therefore not all
extreme values can be called on simultaneously.
Type: eRMG..-G6 and versions
1)
Shaft diameter (dw) : 15 ... 38 mm
Shaft speed (n) : max. 3600 rpm
Material combination : A / eSiC-Q7
Temperature to be sealed (t1) : -20 ... +140 °C
Pressure to be sealed (p1) : 16 bar g
Temperature to be sealed (t1) : -20 ... +120 °C
Pressure to be sealed (p1) : 25 bar g
Material combination : eSiC-Q7 / eSiC-Q7
B / eSiC-Q7
Temperature to be sealed (t1) : -20 ... +120 °C
Pressure to be sealed (p1) : 18 bar g
1)
For other material combinations and seats the operating limits of the seal type
eMG apply.
Beyond that, the range of application of the respective product depends on the
diameter, the materials used, the operation mode and the media to be sealed.
If there are any unclear points please contact EagleBurgmann.