background image

40

LITHO IN U.S.A.

988-0143-34

EAGLE ELECTRONICS  PO BOX 669  CATOOSA  OK  74015

Your unit is covered by a full one-year warranty. (See inside for complete
warranty details.) If your unit fails and the failure is not covered by the
original warranty, Eagle has a flat-rate repair policy that covers your unit
and accessories packed with the unit at the factory. There is a 180-day
warranty on all non-warranty repairs from the factory, which is similar to the
original warranty, but is for 180 days rather than one year. For further
details, please call us at the above number.

Remember, non-warranty repairs are subject to Eagle's published flat-rate
charges and 180-day warranty.

How to Obtain Service

(U.S.A. Only)

We back your investment in quality products with quick, expert service and
genuine Eagle

 replacement parts.  If you're in the United States and you

have questions, please contact the Factory Customer Service Department
using our toll-free number listed below. You must send the unit to the
factory for warranty service or repair. Please call the factory before sending
the unit. You will be asked for your unit's serial number. Use the following toll-
free number:

800-324-1354

U.S.A.only. Monday through Friday 8:00 A.M. - 8:00 P.M. Central time, except holidays.

Eagle Electronics may find it necessary to change or end our shipping policies, regulations,
and special offers at any time. We reserve the right to do so without notice.

Accessory Ordering Information

To order accessories such as power cables or transducers, please contact:

1) Your local marine dealer. Most quality dealers that handle marine

electronic equipment should be able to assist you with these items.
Consult your local telephone directory for listings.

2)  LEI Extras, Inc.  P.O. Box 129 Catoosa, OK  74015-0129

or call

800-324-0045

(USA orders only.)

Содержание Strata 128 Portable









































Отзывы: