7
5.Mains Connection
The supply transformer has been designed for use on 230Vac .
6.Battery Connection (24Vdc)
When using external batteries, earth the amplifier via the screw terminal because of the high
voltage present. Electrical stability of the system is increased by earthing the case.
NOTE:
the connection cable must be fitted with an in-line fuse. Quick blow type F15A when
Connecting batteries please ensure correct polarity.
7.Microphone Connection
Mic1~5 inputs are balanced standard XLR Jack, rear panel.
8.Line (Aux/CD) Connection
The equipment provides an auxiliary input which may be used for connecting other signal
sources such as a Radio Tuner, CD or Cassette player. A push switch is located on the read
panel for selection of, Mic3
→
Tel, Mic4
→
Aux1, Mic5
→
Aux2.
The line level Control operates on each of the input sources.
To operate select the desired music source using the push switch and turn the “Channel”
control clockwise to increase the volume or anticlockwise to reduce the volume.
The Aux / input sockets are standard stereo RCA Jack, single sockets are supplied and
these are linked together internally, this allows stereo signal source to be used without the
need to obtain a special lead, however you may wish to check with the manufacturer of the
signal source to ensure that no damage will result if the left and right output channels are put
in parallel.
