6
The amplifier has a built-in digital Media Player which has 4 modes, Bluetooth, USB, SD card and FM
tuner.
Pressing the MODE button selects either Bluetooth FM tuner.
Output from the media player is controlled by the master volume and the Vol- and Vol+ on the
remote control by pressing and holding the Previous or Next buttons.
Navigation for all 3 modes is provided by buttons beneath the LED display.
USB mp3 Audio Playback
❶ ❷ ❸ ❹ ❺ ❻ ❼
❶ MODE Input source selector FM / Bluetooth
❷ Previous
❸ Play / Pause Track
❹ Next
❺ Repeat mode setting (ALL or ONE)
❻ Insert an SD/MMC card into the SD slot (with the contacts facing up) the display will show “Lod”
to show that it is loading the media, Music will start to play once loaded.
❼ Insert a USB pen drive into the USB port and the display will show “Lod” to show that it is loading
the media, Music will start to play once loaded.
Normal playback will play through all tracks on the selected storage device. Press the Repeat❺
button once to continually repeat ALL tracks in the device, press Repeat ❺ again to repeat just the
current track ONE will be shown on the display.
Pressing the Previous ❷track button briefly steps backwards through tracks on the memory device.
Pressing the Next ❸track button briefly steps forwards through tracks on the memory device.
To pause the current track, press the Play/Pause ❸button and press it again to resume playback.
The LED digital display will show the track number when a track is selected and then the elapsed
time during playback.
Bluetooth Mode
Pressing the mode button until the display shows “bLUE” this enters the Bluetooth mode. On a
smart phone or other Bluetooth enabled device, scan for available devices and look for “Bluetooth”.
Select this to pair and once connected wireless audio playback should be enabled. Once paired, the
smartphone or other device should connect automatically when in range of the amplifier and when
Bluetooth is enabled.