3
2911
Ver. 1 - 06/14
INSTALLATION
Before use, check the following:
1. The
voltage rating
of the power supply must be the same as the voltage
rating of the product to which it is connected.
Connecting a power supply to a product which requires LESS voltage than the
rating of the power supply will damage the product.
A product which requires MORE voltage than the rating of the power supply is
unlikely to work.
The P003M is only suitable with products which require a 12V supply.
2. The
current rating
of the power supply must be equal to or greater than the
current rating of the product to which it is connected.
Connecting a power supply to a product which requires MORE current than the
rating of the power supply will damage the power supply.
3. The
polarity
must be correct. The polarity requirement of the product will be
indicated, as to whether the centre pin is positive or negative.
This symbol means that the centre pin is negative.
This symbol means that the centre pin is positive
The P003M is only suitable for products which require the centre pin to be
positive. Connecting a product to a power supply with the wrong polarity will
damage the product.
OPERATION
Plug the power supply into a 13 A mains socket. If using an extension lead,
make sure that it is rated at 3 Amps or greater, and that it is fully unwound.
Switch on the unit at the mains socket.
Plug the DC power plug into the power supply socket on the product.
PAT TESTING.
When used in an office environment, this product should be safety-tested yearly
by a qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic
environment.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and
disposal is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer
may take the old appliance for disposal.
