Eagle I, Руководство по установке, Страница: 10 / 19

Slide Gate Operators / Eagle I
Two Way Adjustable Reverse Sensor / ERD
____________________
Only a qualified service technician must make all adjustments to the sensor.
CAUTION!
!
There is an LED "OVERLOAD" warning
that will light up when the gate is
heavier than normal for the operator.
During this warning, the operator will
not function properly.
Too Sensitive = if the gates stops or reverses by itself
Not Sensitive enough = if the gate strikes an object and does not stop or reverse
Eagle Access Control Systems, Inc. / (800) 708-8848 / www.eagleoperators.com
(10)
IMPORTANT
When Adjusting Sensors Remember...
The level of sensitivity
depends on the weight
of the gate and the
conditions of installation.
TWISTED
GROUND
WIRES
REVERSE LOOP
REVERSE LOOP
EXIT LOOP
(A)
(B)
LOOP
DETECTOR
LOOP HARNESS
____________________
Connecting the Loop Detector
See larger Exit Loop
Detail on Page 9
For 110V power connect to the 100 junction power box
For 24V AC power connect to terminal on the Diamond Board
(A)
(B)
Loop Detector Power
CAUTION!
Do not connect power
to both A and B, connect
only to the appropriate
power source for your
loop detector!
Gray
Black
Y
ellow
Blue
Brown
Gray
Gray
Black
The Control Board has two
separate pots for adjusting
sensitivity. One is for opening the
gate, and the other is for closing the
gate.