Eagle CUDA 250 S/Map, Дополнительные инструкции

Страница: 7 / 12

7
Communications Port Configuration
Once NMEA 0183 Output has been enabled from the Main Menu, the
Com Port command appears in the System Setup Menu. It allows you
to configure the communications port.
Menus for changing Com Port settings.
If you need additional assistance in configuring the unit to communicate
with another device, consult the factory. Customer service phone
numbers are in the back of the unit's manual. To set Com Port
Configuration:
1. Press
MENU
|
MENU
|
↓
to
S
YSTEM
S
ETUP
|
ENT
.
2. Press
↓
to
C
OM
P
ORT
|
ENT
.
A menu appears with a drop-down Baud Rate selection box highlighted.
The menu also contains an on/off checkbox to activate NMEA Input,
NMEA Output, NMEA GPS Input and a button that allows you to
Configure NMEA.
To set Baud Rate:
With the Baud Rate box selected (the title bar should be highlighted in
black, as in the middle figure above), press
ENT
. A drop-down list
appears, showing available baud rates. Select the one that matches the
baud rate on your VHF radio and press
ENT
.