PCI 703 User Manual
Eagle Technology - Data Acquisition
Eagle Technology © Copyright 2001-2004 – www.eagledaq.com
3
2
2. Installation
This chapter describes how to install and configure the PCI703 for the first time. Minimal
configuration is necessary; almost all settings are done through software. The PCI BIOS or
operating system will take care of all resource assignments.
Package
PCI703 package will contain the following:
•
PCI703 PCI board
•
Software CD-Rom
Operating System Support
PCI703 support the following operating systems
Board Type
Revision
Operating Systems
Driver Type
PCI703-16/A
Revision 1
Windows NT/2000
NT Sys
PCI703-16/A
Revision 2
Windows NT/2000/98/ME
NT Sys, WDM PnP
PCI703-64/A
Revision 2
Windows NT/2000/98/ME
NT Sys, WDM PnP
PCI703S-8/16/A
Revision 1
Windows NT/2000/98/ME
NT Sys, WDM PnP
Table 2-1 Operating System Support
Hardware Installation
This section will describe how to install your PCI board into your computer.
•
Switch off the computer and disconnect from power socket.
Failure to disconnect all power cables
can result in hazardous conditions, as
there may be dangerous voltage levels
present in externally connected
cables.
•
Remove the cover of the PC.
•
Choose any open PCI slot and insert PCI board
•
Insert bracket screw and ensure that the board sits firmly in the PCI socket.
•
Replace the cover of the PC.
•
Reconnect all power cables and switch the power on.
•
The hardware installation is now completed.
