background image

TKS510ET SILVER SERIES

OPERATION AND MAINTENANCE

Page 2

GENERAL INFORMATION - KEY

Any

RIGHT

 or 

LEFT

 - 

CLOCKWISE

 or 

COUNTER CLOCK-

WISE

 indications included in this handbook are always to be

intended with respect to the machine’s direction of movement.

This symbol draws your attention to operations that
could cause 

damage to the machine

 if improperly

executed.

This symbol draws your attention to operations that
could cause

 injury to the  operator

 if improperly

executed.

This symbol draws your attention to operations that
must be read about 

very carefully

.

Consult this manual carefully to gain confidence with your machine
and learn how to use it more efficiently.

1.1 - SECURITY WARNING

All the paragrafh in the following chapter may
cause damage to people and/or object if improp-
erly executed.

ALWAYS KEEP THE MACHINE OUT OF THE CHILDREN’S
REACH.

IMPORTANT NOTE

Precautions to be taken before attempting to start the machine:

To facilitate transport, the side brush, the handlebar and the upper
casing have not been assembled in their actual work position.
Therefore before using the machine, assemble them as shown in this
handbook.

Do not use the machine to soak up liquid.

The machine must be used by authorised personnel only.

Before cleaning or servicing the machine, always turn it off.

As the machine is not provided with a parking brake or service brake,
pay attention when you are using it on sloping surfaces.
Do not leave the machine unattended on sloping surfaces.

The machine must be used only be qualified and authorised person-
nel.
For this purpose, 

NEVER:

- use the machine to transport people;
- touch the moving parts of the machine;
- remove the machine’s guards when it is running;
- do not leave the operating machine unattended.

The petrol-powered machine must be used in open and aired
places only.

Always wear clothing suiting the kind of work you are carrying out.

If you are working in a particularly dusty environment (for instance,
cement factories, sawmills, marble processing factories), it is rec-
ommended to wear:
- a mask;
- protective goggles;
- gloves.

Do not use a jet of water in order to wash the machine.

The machine must not be used for the sucking of the toxic substances.

The machine can only work in presence of light.

NEVER LEAVE the machine with the key in the dashboard
unattended.

In case the machine is being used in a place where there's a danger for
falling little objects, an helmet must be worn by the operator.

Do not use the machine to sweep up cables, straps, wire, or similar
material.

Do not use the machine near cables, wire, or similar material.

USE AND STORAGE IN ENVIRONMENTS WHERE THERE
IS A RISK OF EXPLOSION IS PROHIBITED.

IMPORTANT:

 the manufacturer cannot be held responsible for

damage in the event that the machine is used for
purposes other than those it was designed for. The
machine

 must never be

 tempered with for any

reason whatsoever; in this event, the manufacturer
will accept no responsibility for improper use or
damage to the machine.

Содержание TKS510ET













Отзывы: