Thank you for purchasing an Eagle Health Supplies product!
Helpful instructional assembly videos available at www.EagleHealth.com.
If any push button/pin does not completely snap into place
while assembling, or if you feel the bench is not secure,
please do not use the bench, and notify your Authorized Dealer immediately.
To register your product for the Limited One-Year Warranty, please complete and
return the included Warranty Card, or register online at www.EagleHealth.com.
Locking Mechanism
Lock the seat into place by making sure the slide ring snaps firmly onto the
brass push button at the end of the sliding rail (shown below). Release the
locking mechanism by pressing down on the red tab of the locked slide ring.
UNLOCKED LOCKED
Swivel Seat
Press down on the red tab located under the center of the seat’s front edge to
turn the swivel seat, and rotate the seat slightly. Once the seat starts to swivel,
release the red tab. The swivel seat locks every 90 degrees.
Cleaning
Rinse off the bench with warm water after each use to prevent dirt, soap scum,
and mineral deposits from forming which could affect proper operation. We
recommend regularly cleaning the seat and back with a soft cloth, warm water
and mild soap, or with a soft cloth and any non-bleach cleaner.
Maintenance
Built up soap scum, mineral deposits, or watermarks may cause the brass push
buttons/pins to stick or may cause the seat to not slide smoothly along the rails.
To help, spray lubricant, such as WD-40, on the brass push buttons/pins to
loosen the buttons/pins, or along the sliding rails to maintain a smooth slide.
To maintain a smooth swivel, regularly use WD-40, or other lubricant, and spray
in between the swivel plates, towards the middle swivel bolt.
For Tub-Mount Swivel Sliding
Transfer Bench
77761 / 77762
For Your Comfort. For Your Safety.
For Your Independence. For YOU.
