ASSEMBLY INSTRUCTIONS
Spec-Master
®
Drawers for
Tables with Channel Frame
(Drawers #502971 and 502972)
(For Tables with Angle Frame, see Page 3)
PART #333309
EG9825 Revised 10/05
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Parts List
item
qty
part #
description
#1
2
316985
Drawer Mounting Bracket for
24˝-wide tables
or
#1
2
316986
Drawer Mounting Bracket for
30˝- and 36˝-wide tables
or
#1
2
316987
Drawer Mounting Bracket for
30˝-wide tables
#2
4
308624
#10-24 x
1
⁄
2
˝ Screw
#3
4
301492
#10 Lock Washer
#4
4
300755
#10-24 Hex Nut
#5
1
Drawer Enclosure (pan not shown)
#6
4
313630*
#12 x
3
⁄
4
˝ Sheet Metal Screw
* These screws are premounted to the table channel framing
(underneath tabletop), and will be used to mount drawer brackets.
Before assembly:
• Determine applicable sets of holes in brackets
and in drawer enclosure.
• Please note that 20˝ x 15˝ drawers require
holes to be drilled into table channel framing.
(actual size of hardware)
#1
#2
#3
#4
#1
#5
#6
This hole sets the
drawer in further
under the table.
(continued on Page 2)
#6
#4
#3
#2
