(1) Open the picture with Photoshop.
(2) Select "File" -> "Save As", select the image format is JPEG, input file name as following
picture, then click "Save."
(3) when click "Save" it will pop-up dialog box as shown below; select "Baseline ('standard')"
or "baseline optimized".
(4) Click "OK."
Question 7:
During power on, why does the TV will have a short flashing, blue screen or
screensaver?
Answer:
This is normal, when the system initializes, it will setup the corresponding parameters so it
can output the correct video signal to the TV, during the initializing time, the TV will receive
incorrect signals or the signals will not be stable and will cause the TV screen to flash, some
TV’s will treat this as no signal, and will display a blue screen or screensaver.
Question 8:
Why when I switch to Y/Pb/Pr 480p, 576p, 720p, 1080i, and 1080p, does the TV
screen display an unwatchable picture?
Answer:
Please check if your TV supports Y/Pb/Pr 480p, 576p, 720p, 1080i, and 1080p output, if
your TV does not support, please use the A/V signal display instead, press the TV SYSYEM
button on the remote control, then switch the TV’s video input to NTSC or PAL.
Question 9:
Why is there no sound on movie or music playback when using Y/Pb/Pr component
output?
Answer:
Y/Pb/Pr output is a video output only, and does not include sound signals. When using
Y/Pb/Pr output, please plug the A/V OUT or the S/PDIF jack to output sound.