LVP603S User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
7
picture clean and complete.
In general, this operation is made only when new VGA signal
source is to be connected in. Sometimes user need repetitively do
such adjustment till VGA picture looks clean, complete and stable.
3) Select output brightness
Button names
Description
BRT -
Decrease
output
image
brightness
of
LVP603S,
the lowest brightness is 0.
BRT +
Increase output image brightness of
LVP603S,
the highest brightness is 64.
LVP603S
supports 32 levels Brightness, “0” represents the
lowest brightness, and 64 represents the highest brightness. To
ensure full gray level of output image, normally the output
brightness is set as 64!
4) Information display (Info)
This button can be operated to display the following two status
information:
Current settings of LVP603S:
press “Info” button to display
current settings and information of
LVP603S
. There are total 29
items of information. Press “Info” button again before the
information disappears in LCD, the next entry of information will
appear in LCD.
Status of current input signal source:
press current input
selection button, then press “Info” immediately, the input signal
source selected, e.g.: “In: HDMI”, will appear in line 1 in LCD, and
the status of current input signal source will appear in line 2 in LCD.
If no valid signal is input, “No Input” will appear in LCD; if the signal
is valid, its input signal format such as “
1080p_60Hz
” will appear in
LCD.
5) Select Cut / Fide mode
LVP603S can realize seamless or fading in/out switching
effects, i.e.: Cut, Fide, between the signals coming from the
following 4 groups. But if the signals come from the same group,
LVP603S can only realize freezing seamless switching effect.
