EAE EE-612FE, Инструкция по установке, эксплуатации и ремонту

Страница: 21 / 40

Installation, Operation and Parts Manual
EE-612FE
21
Turn on the power switch
Push the UP button
The lift is raised
Start
Start
Turn on the power switch
Push the DOWN button
The lift is lowered
4.4 Items to be checked after installation.
S/N Check items YES NO
1 Rising speed ≥20mm/s;
2 Noise with rated load ≤75db;
3 Grounding resistance: not bigger than 4Ω;
4 If the control button works as “hold to run”?
5 If limit switches work well?
6 If grounding wire is connected?
7 If rising and lowering smoothly?
8 If there is no abnormal noise during running with rated load?
9 If there is no oil leakage when running with rated load?
10 If expansion bolts, nuts or circlips is well secured?
11 If max lifting height is 1870mm?
12 If Safety advices, name plate and logos are clear?
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1 Check all the joints of oil hose. Only when there is no leakage, the lift can start work.
5.1.2 The lift, if its safety device malfunctions, shall not be used.
5.1.3 The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the rising platforms.
Otherwise, the manufacturer as well as the dealers will not bear any responsibility for any consequence resulted thereby.
5.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5 When platforms rise to the expected height, turn off the power to prevent any wrong operation done by unconcerned people.
If necessary, lock the switch with a padlock.
5.2 Descriptions of control box
Raising Lowering