PRODUCT MANUAL LC100
EAE KNX LINE COUPLER
LC100 R0
©
EAE Technology
www.eaetechnology.com
Page 11 / 17
2.5. LC100 as TP Repeater
Any received telegram is routed to all lines irrespective of in which line it is processed. Line repeaters
make no use of a filter table. It is therefore not important whether the telegram is generated within a
line or whether it is sent from an upper line to a lower line via a coupler.
If a telegram is routed by LC100 without receiving the corresponding acknowledgement, i.e. due to a
missing receiver or to a transmission error, the telegram will be repeated up to three times (depending
on the ETS setting). With the para
meters „Repetitions if errors...“, this function can be configured
separately for each line and both kinds of telegrams. It is recommended to use the default parameter
setting.
If not already configured as Line/Area/BB Repeater, the ETS application program
“TP repeater” has to
be downloaded to the device. Under the Information tab the configuration setting can be changed by
the drop-
down menu “Change Application Program”. After changing the configuration setting the filter
table entries can be added manually. Updating the application program version can also be done here.