EX4 Operation Manual
---21 ---
Remote Controller to Control Flight
Power on
Put the aircraft on the flat surface, turn on the Remote controller and aircraft successively, wait for
aircraft on flat ground for about 30 seconds for self-diagnostic tests.
When the aircraft's indicator light turns from flashing or solid blue to flashing or solid green, which
means the Remote controller and aircraft are connected.
Connect APP
Click WLAN setting, and click "Controller-XXXXXX"
,
exit Settings Options after Wi-Fi Connection
Successfully
Open the APP,enter the home page as shown
,
When the bound interface pops up, please tap
"Check" then tap "Start Flying" to enter the flight operation interface, watch real-time images or
perform necessary operations.
●
Connecting Controller -xxxxxx Wi-Fi, the distance between control and image transmission
is relatively long, which is suitable for long-distance flight.
●
Please maintain the current wifi connection and not switch to the mobile network.
●
Only mobile phones with 5G Wi-Fi can support FPV transmission connection.
●
Use APP to monitor the image and the current state of the aircraft.
●
The remote controller with APP function will achieve the best effect. The remote controller is
mainly used to control basic flight, The APP can achieve other functions,such as taking
photos or videos, track mode, orbit mode or waypoint flying mode. If user hope to control
aircraft via app, please refer to the “Fly with the APP” belowin this manual.
GPS Signal Status
When the status indicator of the aircraft is solid green, it indicates that the GPS positioning is
normal, and the aircraft can take off safely.
When the green light flashes on the aircraft status indicator, it indicates that the GPS signal is
weak or no signal, and altitude mode can be selected for operation (this mode is difficult to operate,
it is not recommended for beginners to use).
●
Set the drone up and get ready to takeoff after the aircraft's indicator light turns solid green
(indicating good GPS signal).
●
Please choose an open and spacious field. Tall steel structures and metal materials will
interfere the compass and GPS.
Operate the Aircraft
Takeoff
Method 1: takeoff manually
Toggle the left and right joysticks outward for at least 3 seconds
(shown as the picture) as to get the propellers started to rotate.
Method 2: one-key takeoff
Pic.
49
Pic.
50
Содержание EX4
Страница 2: ......