Eachine EV100 Скачать руководство пользователя

Страница: 1 / 12

Product

Contents

Eachine EV100
Goggles

Battery*1

Antenna*2

User

Manuals*1

Debug Mode

Eachine

EV100

NEW 5.8G FPV Goggles

User

Manuals

White

Black

3 Racing Mode: 4/6/8 pilots
60-80MHz interval between adjacent channels
greatly decrease interference.

Racing Mode

Press "mode" button ﬁrst and then powering on
goggles, enter debug mode (5300MHz). Requires
a corresponding vtx which support pitmode and
extra frequency 5300MHz.

Detachable Patch

Snap joint assemblies allows easy
replacement and maintenance

Replaceable sponge

Patch
Velcro
Sponge
Flannel

Using Velcro as a bridge, sponge and ﬂannel
can be easily replaced, and Velcro can be
used for a long time.

Battery

Controls Diagram

Band & Frequency table

Unit

MHZ

Racing mode frequency

OSD display

Regular mode:

Display values like: Band-r CH1 5658MHz
(refer to frequency table)

Racing mode:

Mode

Status description

Trouble

Shooting

Eachine

EV100

NEW 5.8G FPV Goggles

User

Manuals

White

Black

No image, display is completely

dark

▪No power supplied. Check power connections.

No image, display is glowingdark grey

▪If using wireless module, ensure RX is working.

If using AV in cable, check video source.

▪

Ensure TX is on and camera connections solid

▪

Ensure lens cap is removed from camera

▪

Complete white screen

▪LCD driver has failed and needs to be replaced under

warranty. Contact your retailer.

Short range

▪Ensure 5.8Ghz antenna were installed.

Power supply

3.5mm

AV in

out

3.5mm Headphone jack

USB in

Turn on/off OSD

Mode/Brightness/Contrast

fan on/off

Focal length adjustment

IPD adjustment

To check battery level

Focal Length Adjustment

Thumbwheel is used to adjust focal length.
(+) means to increase diopter, (-) means to
decrease diopter.

IPD Adjustment

Independent control for both sides,adjust the range
of 58 ~ 68mm.

Slider is switch to adjust IPD. (+) means to
increase IPD,(-)means to decrease IPD.

Controls

Mode/Brightness/Contrast control

Mode :

Debug mode:

Press "mode" button and

power on, enter debug mode (5300MHz).

Racing mode:

Long press "mode" button until ﬁrst beep

to switch mode from 4 pilots/6 pilots/8 pilots. For example:
4 pilots/6 pilots/8 pilots/exit racing mode switching circularly.

Turn on/off RX:

Long press "mode" button until third beep

to enter AV IN (RX OFF).

Auto search:

Long press "mode" button until second beep

to enter auto search.

Brightness:

Pressing forward/back increases/decreases

display brightness.(

)

32 level contrast for the LCD display, default level 28

Contrast:

Pressing left/right decreases/increases

display contrast.(

)

32 level contrast for the LCD display, default level 28

Channel/Band

select

Channel:

short Press channel up/down buttons will cause

the channel to incrementally

increase/decrease from

channels 1 to 8 (refer to frequency table).

Band :

Press channel up/down buttons

3s will cause

the band to incrementally

increase/decrease from band

A to H (refer to frequency table).

Low battery warning:

Buzzer

warning if input voltage

drops below 6.8V.

Turn on/off fan

AV In/Out

Adjustable focal length is perfect for myope under 400
degree and hyperope under 100 degree.

Ground

Video

AudR

AuL

3.5mm AV Connector

AV input & output
Support external HDMI to AV input
Support external DVR.

USB

Channel/Band Selection

Turn on/off OSD:

Press channel up/down buttons

simultaneously to turn on/off OSD.

▪For ﬁrmware upgrading.

▪Alternative power supply.

If multiple power sources are supplied at same time
(Like: power Bank and head strap battery)the goggles
will

draw power from the highest voltage.

Mode

In this mode, the best results can be achieved
by using the supporting vtx.

Product speciﬁcations

°Diagonal

Plastic optic module

58 to 68 mm (adjustable)

Under 400 degree of myopia and

Hyperopia 100 degree (adjustable)

Resolution

: 720*540

NTCS/PAL auto selecting

User Controls:

Channel/Band selection

Mode selection (debug/racer)

Contrast/ brightness control

Turn on/off RX/fan/OSD

Accessories:

7.4V,1000mAh Li-po battery with

LED indicator
Can power the external DVR

3.5mm AV in/out port

Power in port

3.5mm stereo earphone port

USB

in port

Lens wiping cloth

USB

data

cable

5.8G RP-SMA male antenna*2

7.4V, 1000mAh Li-po battery with
LED indicator

Frequency:

Dimensions:

Packaging:

4 pilots

5695 5769 5843 5917

6 pilots

5613 5705 5785 5865 5945

8 pilots

5528 5582 5645 5705 5765 5825 5885 5945

Band

━

Band

━

CH1 CH2 CH3 CH4 CH5 CH6 CH7

CH8

5865

Band

━

5733
5705
5740

5658

5325
5474

5333
5653

5845

5752
5685
5760

5695

5348
5492

5373
5693

5825

5771
5665
5780

5732

5366
5510

5413
5733

5805

5790
5645
5800

5769

5384
5528

5453
5773

5785

5809
5885
5820

5806

5402
5546

5493
5813

5765

5828
5905
5840

5843

5420
5564

5533
5853

5745

5847
5925
5860

5880

5438
5582

5573
5893

5725

5866
5945
5880

5917

5456
5600

5613
5933

(One charging indicator light, one
power-checking button and four
power indicator lights)

It can simultaneously power the external DVR.

Battery charging

SMA*2

RP-SMA*2

USB

data

cable*1

USB charging port

USB charging with approved adapter
( USB:

5V==1.5A or 2A)

Li-Po BATTERY PACK

7.4V 1000mAh(7.4Wh) with LED indicator

Made in china

Charge max rate of 1C(DC connector)

WARNING

Do not open the battery case

Do not use if signs of failure

Never leave batteries near ﬁre or
high temperatures
Battery may balloon or catch ﬁre if faulty
or improperly charged
Never leave a charging battery unattended

165*76*30mm

-10

-40

FOV:

Type:

IPD:

Focal length :

Display:

Battery:

Interface:

Operation temperature :

Weight