EA Technology UltraTEV Monitor, Руководство по эксплуатации, Страница: 76 / 112

EA Technology UltraTEV Monitor
TM
Operating Manual 2178L014
73
Figure 63: Defining a substation layout
A substation layout diagram can be edited in three different ways:
Number of
Panels By using the control box in the top left of the screen, the number of present
panels can be set.
Panel Names At the base of each panel, there is a free text field. This can be clicked in
and then given a name of your choice. Any nodes and sensors placed on this
panel will include the panel name in their description. This makes it obvious
when analysing the data, which panel is being considered.
Components Each panel can be configured to only have a certain set of components. (VT,
CT, Busbar, etc…) Click on a component to remove it and click again to re -
instate it. Nodes and sensors cannot be placed on removed components.
Once the layout has been created, click on the Complete button. This will take you to the list of
substations screen. Figure 64 shows how this list might look.
Figure 64: List of substations
Each substation within the substations list has a number of options available, denoted by the icons
in the Actions column.