EA Technology CableData CDC2, Руководство по эксплуатации

Страница: 33 / 59

EA Technology CableData Collector Operating Manual 1365/L/01/1
Page 29 of 54
Once the phase for each channel has been set, click OK . Figure 31 shows the channel
phase data entered correctly. It is not possible to select the same phase label for multiple
channels.
Figure 31 - Three phase measurement phase data entered
10.4.5 Cable Type
The
Cable Type must now be set. There is a drop down list for this field. There are several
of the most common cable types listed by default. Figure 32 shows the drop down list with
the default options.
Figure 32 - Selecting cable type
If the cable under test does not have a type listed in the available options, then a new option
can be added. To do this, select the
Other…
option. A window will open with a field to enter
the new Cable Type. Only the first 7 to 8 characters will be visible in the Cable Type drop
down list. The window is shown in Figure 33. Enter the Cable Type, and click Add . This will
add the newly entered cable type to the list of available options, and will save it so that it can
be selected again in the future.