Page 6 of 7
© 2005 GLOBAL VR
Installing the Players' Card Dispenser
040-0084-01 8/8/2005
5. Connect the DB25 connector on the dispenser harness to the connector that you installed in the
computer.
DB37 Port on
USB I/O Card in
System Computer
Existing Harness to Cabinet
Components
+5/+12 VDC In From Power Harness
To SmartCard Dispenser
SmartCard Dispenser Harness
(Part # 115-0074-01)
DB25 Port on
USB I/O Card in
System Computer
Figure 6. Card Dispenser Simplified Wiring Diagram
6. Connect the PC power connector on the dispenser harness to the +12/+5 VDC power harness
from the DC power supply.
7. Insert the desired number of Players' Cards in the dispenser, as shown below.
Figure 7. Filling the Players' Card Dispenser
8. Power ON the cabinet and test the dispenser from the System Test screen of the Game
Operator Menu. Set Players' Card pricing from the Game and Coin Options menu.
9. Test all game functions to verify proper operation.
Note:
The dispenser will not work unless it is fully closed and in a vertical position (no more than
a 5-degree angle), with the back cover in place.
Rebooting the computer without power cycling the cabinet may cause the Players' Card
dispenser to dispense a card.
