1)
Push the display incl. throttle on the right side of the handlebar. Tighten the
screw with the tool.
2)
Screw the handle tight (counterclockwise).
3)
Push the electric brake on the left side of the handlebar. Thighten the screw with
the tool.
4)
Screw the handle tight (counterclockwise).
4. Charger connection
5. Display
Instruction:
Turn on
: Long press the power button until the display lights up.
Turn off
: Long press the power button until the display goes out and the system is off.
1. Battery power display: it shows the current remaining battery capacity.
2. Power Off Automatically: After the display stops working (acceleration/deceleration and buttons)
for more than 5 minutes, the E-scooter automatically turns off.
3. Showing Data Switch: When the E-scooter is on, short press the power button , change the
showing data on the display, TIME, ODO, DIS and other characters respectively. When it is showing
time, it indicates the running time after switching on. The time will be cleared after switching off.
When it is showing DIS, it indicates the driving distance after switching on, and it will be cleared after
power off. When it is showing ODO, it indicates the total mileage, which will be retained.
4. Change the gear: Short press
▲ the Speed up Button and the▼ Speed down Button, change the
gear level( Gear 3 is fast speed, Gear 2 is medium speed, and Gear 1 is slow speed).
5. Acceleration: Gently press the accelerator dial to speed up(The depth of the press is related to the
gear).
6. Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the greater
deceleration (the deceleration is relevant to the formation of the press, and pushing too hard can not
increase the braking force and may cause damage to the brake dial). Heel touch on the mechanical
Plug the power supply with the charger into the charging port.
Battery
Gear
Speed
Speed up Button
ON/OFF-button (press min. 3 seconds
to turn off)
Speed down Button
total KM
