e3works DISCCLONE II, Руководство пользователя

Страница: 32 / 38

25
Appendix B - Troubleshooting &
Troubleshooting
This section helps you troubleshoot the D
ISC
C
LONE
II in the event you
have problems with the operation.
Symptom 1: The D
ISC
C
LONE
II has no power.
Solution: Ensure that you have correctly connected the AC power cord
to the D
ISC
C
LONE
II and to a wall socket. Check that the wall socket is
not connected to an on/off switch.
Symptom 2: The D
ISC
C
LONE
II cannot make duplications or recordings.
Solutions: Check to ensure that you are using the correct mode. If you
are using the T
URBO
Function, switch to the S
TANDARD
Function and
see if that works. You might be using a low-quality CD-R/RW disc.
Always use high quality discs when duplicating or recording data to
your
D
ISC
C
LONE
II . Also, ensure that the T
ARGET
and S
OURCE
drive
laser lenses are clean. Use a commercially available lens cleaner to
clean the drives.
Symptom 3: There is no sound when using the D
ISC
C
LONE
II to play
audio CDs in Stand-alone Mode.
Solution: Ensure that you have connected power speakers, that the
speakers are on, and that they are correctly connected to the
D
ISC
C
LONE
II . Also, ensure that you have put an audio CD in the
T
ARGET
drive and have pressed the P
LAY
/F
N
button.
Symptom 4: The red W
ARNING
LED lights and I hear a long beep.
Solutions:
A. If this occurs during startup, do the following:
1. Turn off the power.
2. Check the USB and power cord connections.
3. Restart the D
ISC
C
LONE
II .
FAQ