E3Switch LLC High-Speed Ethernet to Single/Dual DS3/E3 Network Extender... Скачать руководство пользователя страница 2

Legal Preface:

COPYRIGHT & TRADEMARKS
Copyright © 2007 E3Switch LLC.  All Rights Reserved.
All other product names mentioned in this manual may be trademarks or registered trademarks of their 
respective companies.

LIMITED WARRANTY
E3Switch LLC (E3Switch) guarantees that every unit is free from physical defects in material and 
workmanship under normal use for one year from the date of purchase, when used within the limits set forth 
in the Specifications section of this User Guide.  If the product proves defective during the warranty period, 
contact E3Switch Technical Support in order to obtain a return authorization number.  When returning a 
product from outside of the United States of America, clearly state “NOT A SALE.  RETURNED FOR 
REPAIR” on the commercial invoice; and failing to do so, the customer will be responsible for imposed 
duties and taxes.  All customers are responsible for shipping and handling charges for returned items.

IN NO EVENT SHALL E3SWITCH'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT 
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES 
WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) RESULTING FROM THE 
USE OF THE PRODUCT OR ITS DOCUMENTATION, EVEN IF E3SWITCH HAS BEEN ADVISED 
OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH DAMAGES.  E3Switch 
makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the 
contents or use of this documentation and specifically disclaims its quality, performance, merchantability, or 
fitness for any particular purpose.  E3Switch reserves the right to revise or update its products or 
documentation without obligation to notify any individual or entity.  Please direct all inquiries to:

E3Switch LLC
80 Coronado Ave
San Carlos, CA  94070
U.S.A.

http://www.ds3switch.com

[email protected]

TEL: +1-650-241-9941

FCC STATEMENT
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause 

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment.  This equipment 
generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with 
the instruction manual, it may cause harmful interference to radio communications.  Operation of this 
equipment in a residential area is likely to cause harmful interference, in which case the user will be 
required to correct the interference at his own expense.

INDUSTRY CANADA NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus 
set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables aux 
appareils numeriques de la class A prescrites dans le Reglement sur le brouillage radioelectrique edicte par 
le ministere des Communications du Canada

EUROPEAN UNION (EU) STATEMENT
This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on the 
approximation of the laws of the Member States relating to electromagnetic compatibility.  The 
manufacturer cannot accept responsibility for any failure to satisfy the protection requirements resulting 
from a non-recommended modification of the product.

2

Содержание High-Speed Ethernet to Single/Dual DS3/E3 Network Extender...































Отзывы: