e2v Eliixa+ 4k, Руководство пользователя, Страница: 22 / 55

® 8k/4k CL
22
UM 8k/4k CL – REVA – 01/13
e2v semiconductors SAS 2013
6.3.2 Image Format
•
Sensor Width
(
SensorWidth
) : Get the physical width of the Sensor. This value is available in the CommCam
“Image Format Control” section :
Read function : “
r snsw
”;
Return by the sensor : Integer 8192.
Can not be written;
•
Sensor Height
( SensorHeight ) : Get the physical height of the Sensor. This value is available in the
CommCam “Image Format Control” section :
No Access. Virtual command in xml”; Value always = 1
•
Width Max (
WidthMax
) : Get the Maximum Width of the Sensor. This value is available in the CommCam
“Image Format Control” section :
No Access. The value is mapped on “SensorWidth”
•
Height Max
(
HeigthMax
) : Get the Maximum height of the Sensor. This value is available in the CommCam
“Image Format Control” section :
No Access. Virtual command in xml”; Value always = 1
•
Output mode
( OutputMode ) : Set the CameraLink Output mode (refer also to Chap 3. : CameraLink Output
Configuration). This command is available in the CommCam “Image Format Control” section :
Read function : “ r mode ”;
Returned by the camera : Output mode from 0 to 3 (see table below).
Write function :
“w mode”
<value> :
detailed in the table below :
Modes Connector CL1 Connector CL2 Mode value
Base 2 Channels 8 Bits 2 x 8 bits - tbd
Base 2 Channels 12 Bits 2x 12 bits - tbd
Medium 4 Channels 8bits 4 x 8 bits 0
Medium 4 Channels 12bits 4 x 12 bits 1
Full 8 Channels 8bits
(BA1 Version Only)
8 x 8 bits 2
Full+ 10 Channels 8bits
(BA1 Version Only)
10 x 8 bits 3