U
SER
M
ANUAL
16
K
/8
K
CXP
C
OLOR
–
R
EV
G
–
09/2016
P
A G E
|
18
4
STANDARD CONFORMITY
The cameras have been tested using the following equipment:
A shielded Trigger cable
A 10m CoaXPress Cable for the data transfer, certified at 6Gb/s
e2v recommends using the same configuration to ensure the compliance with the following standards.
4.1
CE Conformity
The cameras comply with the requirements of the EMC (European) directive
2004/108/CE (EN50081-2, EN 61000-6-2) (see next page).
4.2
FCC Conformity
The cameras further comply with Part 15 of the FCC rules, which states that: Operation is subject to
the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Warning
: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
4.3
RoHs Conformity
cameras comply with the requirements of the RoHS directive 2011/65/EU.