DIVIINA
®
LM2
27
0994G -Diviina LM2 04/11
e2v semiconductors SAS 2011
9.2
CommCam Connection
Defect
Detail
Solutions
CommCam Can’t find the Camera :
After launching CommCam, the Icon
of the Camera is not visible.
•
The Camera is not powered up or the boot
sequence is not finished.
•
The CameraLink cable is not connected or
connected on the bad connector.
•
Check if the CameraLink libraries (clallserial.dll
and clserXXX.dll) are in the same directory
(either
system32
or
program
files/cameralink/serial
)
•
The Frame Grabber is compliant with
CameraLink standard 1.1
¾
Contact the hotline :
An e2v Camera is detected but not
identified
:
A “question Mark” icon appears in
place of the one of the AVIIVA2
•
The version of CommCam used is too old : You
have to use the version
1.2.x
and after.
Impossible to connect to the
identified Camera
:
The message “Impossible to open
device” is displayed
•
There is a possible mismatch between the
major version of xml file used by CommCam and
the firmware version of the Camera
•
Possible Hardware error or Camera
disconnected after being listed.
¾
Contact the hotline :
Error message is displayed just
after the connection
:
•
There is a possible mismatch between the
minor version of xml file used by CommCam and
the firmware version of the Camera
•
Default values of the Camera out of range
¾
Contact the hotline :
