e2-Live Home Automation
Edit by Amos /20150810
12
RP-20 make sure connect to PC
Remove the connector wire out of the package, connect RP-20 and PC
+
+
Note
：
By using this connector wire to connecting RP-20 with PC to setting any parameters through
your PC,
does not require a transformer
, RP-20 can be powered by PC
Power source of PC,
but if the setting is completed, installed in a fixed location, Please use the
power adapter attached with the package to ensure that the operation of RF and IR transmitter
function properly.
Install USB driver
Connect USB wire to PC, on the screen of right down angle of the PC will show that had automatically
found the device of RP-20 USB.
x
If the computer does not have a suitable driver, the follow message will appear.
Or from the Device Manager to confirm whether the RP-20 USB devices can be used
Support PC system
Windows XP
Windows 7 (32/64
位元
)
Windows 8 (32/64
位元
)
