e.ziclean FURTIV, Руководство пользователя

Страница: 15 / 23

D. MAINTENANCE OF THE SIDE BRUSH
Use a screw driver to remove the cleaning side brush from the robot. While out of use, replace your
side brush for a new one.
Advises
It is possible to give back your side brush shape putting them into water for few minutes.
E. CLEANING STAIR SENSORS AND INFRARED DETECTOR

The sensors and infrared detector should be cleaned by using a cotton swab or soft cloth.

The wall-following sensors are installed in the front of bumper of the cleaner, the ground
detection sensors are installed at the front bottom of the cleaner (see the figure above).