![E-Z-GO ST SHUTTLE 4/6 2009 Скачать руководство пользователя страница 163](http://html1.mh-extra.com/html/e-z-go/st-shuttle-4-6-2009/st-shuttle-4-6-2009_technicians-repair-and-service-manual_3217950163.webp)
WEATHER PROTECTION
Page P-5
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notices, Cautions, Dangers and Warnings.
FULL FRONT WINDSHIELD
Tool List
Qty.
Plastic faced mallet ..................................................... 1
Wrench, 7/16".............................................................. 1
Phillips screwdriver...................................................... 1
Remove protective covering from the windshield (item 2)
(Ref Fig. 3 on page C-5).
Install sash (item 3) on each side of the windshield.
Using a plastic faced mallet, gently tap sash to ensure
windshield seats properly (See Detail A).
Insert screw (item 4) through washer (item 5), rubber
grommet (item 6) and existing hole in front strut. Secure
with washer (item 5) and lock nut (item 7) (See Detail B).
Do not over-tighten or squeeze grommet
.
Place bottom section of windshield on rubber grommets
and press the sash, starting at the bottom, onto the front
strut so that it snaps into place (See Details B and C).
Repeat for opposite side of windshield.
Fig. 3 Full Front Windshield
6
5
5
Strut
3
7
4
2
Front of Vehicle
DETAIL B
3
Windshield
DETAIL A
Windshield
Strut
3
DETAIL C