e-Yantra Team eYFi-Mega, Руководство по оборудованию

Страница: 24 / 26

6. Open the Atmel Studio 7 software. Select the option Device Programming or use
the shortcut Ctrl + Shift + P . A dialog box will open as shown in Figure 6 .
7. Under Tool option, select AVRISP mkII .
8. Under Device option, select ATmega2560 .
9. Under Interface option, select ISP .
10. Click on Apply .
11. Click on Read to read the Device Signature.
12. Check whether the
Device Signature
value is
0x1E9801
and the
Target Voltage
is
around
5V
.
13. Go to Fuses and select the Fuse settings as shown in the Figure 6 .
Figure 6: Device Programming dialog box in Atmel Studio 7
14. Make sure that the option of Auto read and Verify after programming are selected
as shown in Figure 6 .
Figure 7: Fuse settings to be done
15. Once you are done with the above settings, click on Program .
23